EWS-1354-11/2"-P

Iron Removal High Oxidation Media Units
For the removal of iron (pink to red), manganese (tan, brown to black), and/or the rotten egg smell of hydrogen sulfide.

Specify for 11/4" to 11/2" service line with minimum of 40 psi and 12 gpm.

Technical Information: Pyrolox Series: EWS-1354-11/2"-P
Units do not include stainless covers and all units must be assembled on site due to excessive shipping weight. Simple instructions for proper loading and assembly, install and start-up available with each unit.

Model No: EWS-1354-11/2"-P
Tank Size: 13 in. X 54 in.
Media (cu.ft/lbs): 2.2
Line Size: 11/4" - 11/2"
Valvehead Digital: 2850
Installed Unit Size: 13 in. X 63 in.
Water Flow (GPM): 35
Backwash (GPM): 10

MEDIA SPECIFICATIONS:
• Color: Black Odor/Taste: none; Physical Form: Granular;
• Screen Size: 8-20 (US mesh); Specific Gravity: 1.93;
• Bulk Density (pounds/cu. ft.): 120
• Life Expectancy: 10 - 15 % attrition per year
(due to lost media fines in the backwash cycle)
• pH Range: 5.0 - 9.0 (best performance - 6.5 pH and higher)
• PSI and Flow Rate Required: Minimum 40 PSI:
• Minimum 8 GPM (1354 tank), 12 GPM (1354 tank)

CAUTION about the proper use of these and any treatment system on a well and water that is not monitored, tested, or treated on a routine basis.

EWS-1354-11/2"-P Service Line Size: 11/4”-11/2" Drain Line Size: 3/4” Installed Dimensions: Height: 63” (top of valve) Dry Weight: 265 lbs. Width: 13” Clearance: allow 2’ for plumbing. Bypass required with 3 valves and unions for quick disconnect for media replacement, maintenance and warranty.

EWS-1354-11/2"-P
Valve (DTV-HF, 2850) Bypass is Plumber Installed as illustrated.

Caution: Please note the following;
• Proper specifications of tank valve and media will be the key to your success with the proven PYROLOX media. Proper sizing of the valve and backwash flow against the proper tank size and water service flow rate will result in satisfactory media performance. (Be sure the valve has adequate water supply for full backwash cycle.)

• If the media is not properly backwashed it will not lift the 20% necessary to break loose the contaminants of particulate hydrogen sulfide, iron and manganese. Without proper backwash (we recommend a daily backwash) you can quickly foul the bed and make the media useless. Therefore know your water problems and conditions, your PSI and GPM.

• The introduction of any organic link to iron (iron bacteria) or manganese creates a coating on any media or resin and will render the system useless. Chlorination or some form of effective treatment must be established at the origin of the water.

• If the media is not properly backwashed it will not lift the 20% necessary to break loose the contaminants of particulate hydrogen sulfide, iron and manganese fouling and making the media useless. This requires a boosted water flow rate and/or water pressure to the system to function properly.

MFG Suggested Retail $4,900.00
On-Line Price $3,675.00
Shipping and Handling $265.00

Save 25% When You Buy On-Line!

Discussion on Potential Problems and Solutions
Technical Information
Filter Replacement Code: POE-17
Warranty
Compliances
Conditions of Sale