RU500T35 w/BP w/UV

Five Stage Undercounter Reverse Osmosis System w/ Booster Pump
and UV Disinfection

Five stage 35 GPD TFC membrane for unusually heavy sediment, high total dissolved solids (TDS), and/ or particulate well water. Three stages to protect and filter prior to the TFC membrane. Post filter for polish after membrane prior to storage tank. Available with or without either UV module or booster pump. Booster pump option is to provide adequate pressure to the feed water, in order that, the system works properly under these circumstances. All units meet or complies with NSF Standards 42, 58 and 55 with UV option.

• Faucet with Chrome, Lead-Free Dispenser
• Powder Coated, Corrosive Resistant Bracket Mounts Easily
• Quick Connect Fittings for Easy Installation
• Easy to Use Membrane Housing and 10" Heavy Duty Filter Housings Contain our Full Sized Cartridges for Optimum Performance and Longer Life
• Replacing Filters is Easy; Use the Included Spanner Wrench to Spin Housing Off, Replace Filter, Spin Housing Back On

Benefits:
• Safeguards and Kills Bacteria, Viral, E-Coli and other Microorganisms (with UV option)
• Reduces Total Dissolved Solids, Minerals and Inorganics
• Reduces Lead and Cysts (Cryptosporidium and Giardia)
• Reduces Dirt, Sediment and Rust
• Improves Taste, Clarity and Odors
• Removes Chlorine and VOC's
• Replaces Costly Bottled Water
• Better Tasting, Filtered Water for Coffee, Tea, Juices and Ice

Applications:
• Installs Easily at Any Sink, Wet Bar or Any Point of Use Location
• Can be Cross-Connected (if applicable) to Refrigerators, Ice Makers
and Other Devices**
• For All Your Drinking and Cooking Needs

All completely assembled reverse osmosis systems include the following standard features:
White 10" housing with filtration cartridges, spanner wrench to open housings for easy filter replacement, easy to use membrane housing, chrome, lead-free faucet with white trim (with air gap adaptor) for dispensing water, self-piercing saddle valve for water line connection with shut-off valve (see service guide for your correct application), all necessary tubing (color coded) to make proper connections, simple to use mounting bracket, UV lamp and setup (UV unit only),pump (booster pump units only), drain saddle and bladder tank, complete service guide with installation and use instructions. All units are upgraded to produce more water and waste less. All units include a 3.2 gallon storage tank and we incorporate our RSR control valve which monitors flow and operates as a check valve/backflow prevention and an automatic shut-off to protect the system.

The Option and Correct Application of Booster Pumps
Booster pumps are critical to the effective performance of reverse osmosis membranes in low water pressure situations (feedwater below 40 PSI and/or high TDS). Along with mechanical and electro-mechanical options, booster pumps enhance RO systems in the following ways:

• Monitoring performance
• Improving membrane efficiency
• Conserving water
• Conserving power
• Shutting down the pump when continuous product water is not necessary

Booster pumps P6000 are recommended in reverse osmosis applications where feedwater pressure is less than 40 PSI. Feedwater high in Total Dissolved Solids (TDS) may need a boost, in order to perform within rejection parameters. FACT: Over 500 mg/l or ppm TDS, the PSI will be reduced by 1 PSI for every 100 TDS. For Example; Feedwater that is 2,000 mg/l of TDS will reduce PSI by 15. A booster pump will compensate to allow for proper application. On well-water, know your water pressure (PSI) and your TDS.

MFG Suggested Retail $1,895.00
On-Line Price $1,421.25
Shipping and Handling $44.00

Save 25% When You Buy On-Line!

Technical Information
Filter Replacement Code: 1, 6, 12, 21, 22, 16
Warranty
Compliances
Conditions of Sale